地址:北京市朝阳区南磨房路37号华腾北搪商务大厦22层
工厂:北京市通州区宋庄佰富苑工业园青田国际设计大厦7层
电话:010-86203268 86203269
传真:彩色扫描至qiye@paifst.com
邮箱:qiye@paifst.com
邮政编号:100022
网站:www.paifst.com
全国服务热线:010-86203268
Gas membrane diamond anvil cell for high-temperature optical and x-ray measurements.
气体膜金刚石压砧,适用于高温光学和X射线测量。
► The Diacell® HeliosDAC is ideal for high-temperature and high pressure experiments, being able to reach over 1000°C and 100 GPa.
该产品非常适合用于高温高压实验,高达1000°C和100Gpa以上。
► This cell is suitable to both optical (numerical aperture of 0.42) and x-ray (20 up to 25。)experiments.
适用于光学(数值孔径0.42)和X射线(20—25°)实验。
► The Diacell® HeliosDAC employs an internal resistive gasket heater and a series of unique insulating stages to maintain the cell at a reasonable temperature even when operating at full power.
The Diacell® HeliosDAC采用内置式电阻圈加热器和一系列独特地绝缘进程来使砧腔维持在一个合理的温度内,甚至当其满负荷操作时。
► Being gas membrane driven means that pressure within the HeliosDAC can be adjusted whislt at high temperatures.
气体膜驱动意味着温度升高的同时,HeliosDAC内部的压力也会随之调整。
► Maximum pressures of up to above 100 GPa may be obtained with the Diacell® HeliosDAC.
最大压力可达100Gpa以上。
► The HeliosDAC_Plus is the version of this cell that employs Boehler-Almax anvils, enabling even larger x-ray apertures.
The HeliosDAC_Plus是使用Boehler-Almax 砧的The HeliosDAC版本,能增大X射线孔径。
Technical Specifications:
技术规格
材料
cell material |
不锈钢AISI 440C
Stainless Steel AISI 440C |
砧座(支撑板)
anvil seat(support plate) |
碳化钨(钨刚)
Tungsten Carbide |
压力机制
Pressure Mechanism |
气体膜
Gas membrane |
顶角
Top Angle |
X-射线:锥形50º
X-ray: Conical 50° |
底角
Bottom Angle |
X-射线:锥形50º
X-ray: Conical 50° |
DAC直径
DAC Diameter |
56毫米 |
DAC高度
DAC Height |
47毫米 |
样品工作距离
Working Distance to Sample |
16毫米 |